Geemarc CL7060 Quick User Manual

Contents

technical specifications

Geemarc CL7060 Quick User Manual Manual pdf 1 page image

1 2QUICK USER GUIDE!!! Please refer to our website: www.geemarc.com for an up to date user guide,as there may be important updates and changes you need to be aware of !!!INTRODUCTIONThis 2.4GHz DIGITAL WIRELESS INDUCTION NECK-LOOP SYSTEM uses thelatest digital wireless technology. This enables the sound from your selected audiodevice directly into your hearing aids. Simply connect the transmitter to the desiredaudio source: TV, sound system, etc.FEATURES• 2.4GHz digital hopping system technology• Inductive neck-loop transmits directly to hearing aid• Docking charge mechanism• Battery saving auto RF transmission off (when no audio signal)• In personal listener mode CL7060 mutes audio input.• Speed charging mechanism• Spare battery for continuous use.• Left/right balance and tone control• Optical audio inCOMPONENT PART LIST(A1) Neck-LoopReceiver withaudio output jack(A2) Transmitter(A3) Polymer LithiumRechargeableBattery x 2 pieces(A4) AC/DC Adapter(A5) RCA AdapterCable(A6) Audio Cable (3.5mm stereo plug atboth ends)(A7) TOSLINK OpticalCableDESCRIPTIONFunction Identification: Neck Loop Receiver(B1) Break-free Plug(B2) Volume Adjustment(B3) Power on indicator(B4) Microphone button for room monitoring(B5) On/Off switch(B6) Microphone(B7) Volume balance (left/right)(B8) 3.5 mm Audio output jack(B9) BatteryFunction Identification: Charging Cradle(C1) Charging Cradle(C2) Spare Charging Slot(C3) LED Charging Indicator for Spare Battery(C4) LED Charging Indicator for Main Battery(attached to neck loop receiver)(C5) LED Power/Signal Indicator(C6) Tone Clarity Button(C7) LED Indicator of Tone Clarity(C8) DC In(C9) Mono/Stereo Select(C10) Optical input for TOSLINKcable(C11) 3.5mm Audio InPlease note that only one input (either audio input or optical input) should beconnected.INSTALLATIONTransmitter(D1) Connect the power adapter to the DC IN input socket located on the transmitterrear panel.(D2) Connect the power adapter provided to an electrical outlet. Make sure thePower LED on the Transmitter is ON.(D3) Connect the transmitter to your audio source.(D4) RCA Adapter Cable, Audio Cable, TOSLINK cable and are provided for differenttypes of connection to your Audio Source (e.g. TV set, sound system, etc).(D5) When using the TOSLINK cable ensure that the clear plastic protective coversare removed from both ends.Please note that only one input (either audio input or optical input) should beconnected. Where possible the best audio result will be obtained by using theTOSLINK cable.The power adaptor with detachable plugssuitable for UK and Europe.The green power indicator LED will blinkwhen you connect the power adapter tothe electrical outlet, When the audiosignal is detected from the audio source,the green LED Indicator will be on.SETTING UP THE NECK LOOP RECEIVERInstallation and charging the batteryFRONTREAR3.5mm headphonesocketRCA socketOptical JackFRONT REARFig. A Fig. B Fig. CAdaptor+UK plugEuropeplug

/ 2

Related manuals for Geemarc CL7060