Geemarc Ampli600 User Manual

Also see for AMPLI600: User manual

Geemarc Ampli600 User Manual Manual pdf 5 page image

5Wall mounting holesscrewINSTALLATIONWall Mount InstallationSlide the handset hanger bar out and rotate it 180 degrees. Slide it backinto place. The hook will now point up. This ensures the handset will not fallout of the cradle when it is mounted on the wall.Plug the 8in short phone cord into the telephone jack on the AMPLI600, nowrun the phone cord under the wall plate adapter and through the opening.Insert the Wall Plate adapter. Hold it so that the raised mounting pins lineup with the phone’s keyholes on the AMPLI600. Once the holes are linedup, push the wall plate adapter in towards the AMPLI600 and then slide theplate upwards until it is securely placed on the phone.Once the Wall Plate adapter is installed, plug the 8 inch short cord into thejack on the wall.Holding the phone slightly above the mounting screws on the wall jack,push the phone against the mounting screws so they are hooked into upperand lower key-hole slots on the back of the phone. Slowly slide the phonedown until it snaps into place.Connect the handset curly cord to the handset and the other end to thetelephone.Lift the handset, if there is a dial tone, the telephone is ready for use. If thereis no dial tone, check that everything is plugged in as described above.