Gecko in.k506 User Manual

Gecko in.k506 User Manual Manual pdf 1 page image

Water temperatureThe temperature shown at the top of the screen givesthe actual water temperature.Use the Up and Down buttons to set the desiredtemperature. The set point will appear in blue atthe bottom. After 3 seconds without any change tothe set temperature value, the keypad will resume thenormal display of messages.DescriptionMain functionsQuick Reference CardPlease consult your spa user manual for complete info on the features of your spa system.in.k506intuitive color keypadThe in.k506 is built with all the great features you've come to lovein the in.k800, but in a smaller package. It is discreet, compact,and unobtrusively beautiful. Save space without losing out on function.SettingsLight KeyModeUpKey 1DownSelection lights Key 2*Functions for keys 1 and 2 will depend on your system's low level configuration.Start or stop accessoriesTo start or stop an accessory, press the associatedbutton. Icons will become animated when theiraccessory is turned on, and inanimate when turnedoff. Icons on the screen will reflect the speed or stateof the devices running on your spa.When an accessory has more than two states,press the button until it reaches the desired state.Note (version 14.00 and higher): A special buttonsand icons mapping may be used when the spaconfiguration has 4 accessories* (3 pumps and ablower or 4 pumps and no blower). In this case only,buttons and icons are divided in 2 sets of accessories.Button #1 starts or stops pump #1 and pump #2.Button #2 starts or stops Pump #3 and Pump #4/blower. Corresponding icons will be animated whenone or more accessories are on.* Only Pump #1 can have a dual speed.Mode keySuccessive presses on the Mode key will give accessto control different optional accessories of your spasuch as Audio and others. Note that if an accessoryis not present in your spa configuration, its menu willnot appear. Refer to the following section to get detailsabout the possible accessories and their detailedfunctionalities. The screen will revert back to the spamode if no key is pressed for 60 seconds.If you don't have any accessories, Mode key can beused to change your display orientationSettings keyOne press gives you access to a menu to manage thesettings of your spa. Refer to the settings section fordetails about the settings menu.Main screenThe main screen gives you access to your accessoriesand water temperature. At the bottom of the screenyou will see any error or maintenance messages thatare present.PowerPress any button to turn the keypad on.After 30 minutes without activity it will shut off.5