Menu
Gearmore RE1000 Operation, Service & Parts Manual
                              | |
Contents
| 
Risk of being entangled due to rotary driveshaft connectingthe tractor - machine.Compression and crushing (being entangled) due to contactwith the stirrer rotating inside the hopper.Compression and crushing due to presence of motiondistribution chains and pinions.Any reset operation must be carried out with the tractor engineoff, power take-off disconnected, parking brake on, and start-upkey removed from the panel.Cuts and abrasions due to contact and handling of blades, discs,distributors and driving elements during reset operations.Use shear-proof gloves.53. SAFETY INFORMATION (continued)3.2 OPERATIONAL SAFETY (continued)ATTENTION!Any maintenance, adjustment and cleaning operation must be carried out with the machine lowered tothe ground (in stable conditions), the tractor engine off, power take-off disconnected, parking brake on,and start-up key removed from the panel.Machine start-up and stop controls are those of the pulling tractor; the machine is not equipped withcontrols.While removing solid parts of fertilizer, the machine must be disconnected from the tractor. For thisoperation, use the specific tools.In case of failure or improper operation, the operator must immediately stop the machine, check theproblem and adopt any necessary measure.HAZARDS, PREVENTION AND PROTECTION MEASURES |
Related manuals for Gearmore RE1000
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved