Menu
Gato Audio FM-30 User Manual
            | |
Gato Audio FM-30Page 6WARNING: Please note that using spikes under your speakers will invariably leave marks on your floor or any other surface that you placethe speakers on. Gato Audio cannot accept any responsibility for any type of damage to floor, furniture surfaces, marriage or anythingelse resulting from the use of spikes. It is up to you and your family to consider carefully beforehand whether the improvements in soundquality and performance will outweigh the possibility of any inconvenience caused.Mounting the driver grillesThe grilles are easily fastened to the speakers magnetically when the small magnets on the grille are aligned on top of the driver screws.1. Place and hold the grille lightly on top of the driver asshown below2. Turn it clockwise or counter-clockwise until you canfeel the magnets attach to the screws below.To detach the grille from the speaker simply turn the grille clockwise or counter-clockwise and remove it.InstallationUsing spikes1. Place the 4 spikes inthe holes of the plinthby screwing them inclockwise2. Turn the spikes up or downto adjust the speaker heightfrom the floor, so all spikesare touching the floor at thesame time3. Turn the fastener clockwiseuntil it is positioned tightlyagainst the plinth. Makesure the spike does notturn during the process bygrasping the top with yourother hand if necessary4. The spike feet can beapplied to protect thesurface underneath thespikes |
Related manuals for Gato Audio FM-30
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved