Gateway MX3311 Hardware Replacement Manual

Also see for MX3311: Hardware reference

Contents

Gateway MX3311 Hardware Replacement Manual Manual pdf 1 page image

1www.gateway.comReplacing the AC AdapterTechnical SupportSee the label on the bottom of the notebook for CustomerCare Information. See your hardware guide for importantsafety, regulatory, and legal information.© 2006 Gateway, Inc. All rights reserved. Gateway andeMachines are trademarks or registered trademarks ofGateway, Inc. in the United States and other countries.All other brands and product names are trademarks orregistered trademarks of their respective companies.Replacing the AC AdapterTo connect the AC adapter:1 Connect the power cord to the AC adapter.2 Connect the AC adapter to your notebook’s powerconnector.3 Plug the power cord into a wall outlet. The batterycharge indicator turns on.If the battery charge indicator does not turn on,unplug the adapter from your notebook, then plugit back in.CautionReplace the power cord if it becomes damaged.The replacement cord must be of the same typeand voltage rating as the original cord or yournotebook may be damaged.WarningDo not attempt to disassemble the AC adapter.The AC adapter has no user-replaceable oruser-serviceable parts inside. The AC adapterhas dangerous voltages that can cause seriousinjury or death. Contact Gateway about returningdefective AC adapters.ImportantIf the battery charge indicator does not turn blueafter three hours, contact Gateway CustomerCare at the Web address or telephone numbershown on the label on the bottom of yournotebook.Power indicator