Gateway GT4015 Hardware Reference Manual

Contents

Gateway GT4015 Hardware Reference Manual Manual pdf 20 page image

Adding or replacing a CD or DVD drivewww.gateway.com1710 Replace the side panel by following the instructions in “Replacing the sidepanel” on page 14.11 Reconnect all external cables and the power cord.12 Turn on your computer.13 Open the BIOS Setup utility.14 In the BIOS Setup utility, restore any settings that you wrote down inStep 3.15 Save all your settings and exit the BIOS Setup utility.Adding or replacing a CD or DVD driveTips & TricksYou need a Phillips screwdriver to add orreplace a CD or DVD drive.To add replace a CD or DVD drive:1 Remove the side panel by following the instructions in “Removing the sidepanel” on page 12.2 Remove the front bezel by following the instructions in “Removing thefront bezel” on page 13.ImportantThe color and shape of your replacementcomponent's front cover may vary fromyour original component.3 If you are replacing an existing drive, disconnect the cables from the drive,noting their locations and orientation. You will reconnect the cables afteryou install the new component. (CD/DVD drive shown.) If you are installinga new drive, go to Step 6.