Gateway FX530 Reference Manual

Contents

Gateway FX530 Reference Manual Manual pdf 50 page image

Overclocking the processor45To change the clock speed of your processor:1 Turn off your computer and disconnect thepower cord.2 Place your computer on its side with theside accesss panel facing up.3 Follow the anti-static precautions in“Preventing static electricity discharge” onpage 50.4 Open the side panel and locate the jumperlabeled J3C2 BIOS Config on the systemboard.5 Remove the jumper from its normalposition (bridging pins 1-2), then place it inthe maintenance boot position (bridgingpins 2-3).6 Reconnect the power cord.7 Turn on your. The BIOS Setup utility opens.8 Press the arrow keys to select thePerformance tab. Press the arrow keys tohighlight Set Processor Multiplier, thenpress Enter.J3C2 BIOSConfig jumperJ2B3 jumper(do not adjust)