Gateway 960 Installation Manual

Also see for 960: User guide User guide

Contents

Gateway 960 Installation Manual Manual pdf 18 page image

14Installing Your Gateway Server into a Rackmount Cabinetwww.gateway.comInstalling your server into arackmount cabinetBefore adding the rails to your server, make sure that the server is on a stablework surface, such as a strong table or counter.Although your server configuration may vary from the server configurationshown in the following instructions, the general installation process will besimilar. To install your server into a rackmount cabinet, you need to completethe following tasks in sequence:1 Install the inner rails on each side of the server.2 Attach the rail assemblies to the rackmount cabinet brackets.3 Install the rackmount cabinet brackets and the rail assemblies.4 Mount the server into the rackmount cabinet.Warning To avoid injury or dropping the server, we recommend thattwo people lift the server.