Gateway 8400 Installation Manual

Also see for 8400: System manual

Gateway 8400 Installation Manual Manual pdf 18 page image

Installing the cabinet mounting brackets and mounting rails 13Installing generic mounting bracketsIf you are installing the server in a non-Gateway cabinet, use the genericmounting brackets. These brackets allow for different cabinet depths. Ifgeneric mounting brackets are already installed in the cabinet, go to“Installing the cabinet mounting rails onto generic brackets” on page 14.To install the generic mounting brackets in the cabinet:1 If you received a mounting template with your cabinet, use it to locatethe exact position of the cabinet mounting brackets.2 Position the front mounting bracket (shorter bracket) on the front verticalmounting rail.3 Attach the front mounting bracket to the front vertical mounting railusing two screws from the accessory kit.If screw holes in the front vertical mounting rail are not threaded, attachthe front mounting bracket by using the screws and bar nut from theaccessory kit.Caution When considering the position of the system in the cabinet,make sure that a hazardous stability condition is notcreated because of uneven loading.Back mountingbracketBar nutsBack verticalmounting railFront mountingbracketFront verticalmounting rail