Garmin nüvi 660 Installation Instructions Manual

Also see for N??VI nvi 660: Owner's manual Specifications Quick reference guide

Garmin nüvi 660 Installation Instructions Manual Manual pdf 1 page image

zūmo 660 Installation InstructionsMount Your zūmo on the MotorcyleWarning: Incorrectly wiring the power cable with bare wire leads can result indamage to the vehicle or the battery and can cause bodily injury. Garmin stronglyrecommends having an experienced installer with the proper knowledge of electricalsystems install the unit.See the Important Safety and Product Information guide in the product box for product warningsand other important information.Step 1: Connect Power to the MountSelect a suitable and secure location to mount the zūmo on your motorcycle, based onavailable power sources and safe cable routing.Cradle Headphone/audio out jack (3.5 mm)Microphone jack (2.5 mm) Mini-USB connector(for traffic receiever)Bare wires withinline fuse forpower connectionPower cableStep 2: Install the Handlebar BaseThe zūmo includes parts for two handlebar installation solutions. Custom mounts canrequire additional hardware (www.ram-mount.com).A) To install the U-bolt and handlebar base:1. Place the U-bolt around the handlebar, and thread the ends through the handlebarbase.2. Tighten the nuts to secure the base. Do not overtighten.note: The recommended torque is 50 lbf-in. Do not exceed torque of 80 lbf-in.HandlebarbaseHandlebarU-bolt

/ 4

Related manuals for Garmin N??VI nvi 660