Garmin Street Pilot 2720 Owner's Manual

Contents

Garmin Street Pilot 2720 Owner's Manual Manual pdf 42 page image

36 StreetPilot 2720 Owner’s ManualAPPENDIXA PPENDIXConnecting to Your ComputerTo update your software and load additional maps orCustom POIs, you need to connect your 2720 to yourcomputer using the USB cable provided.NOTE: Do not connect the USB cable to yourcomputer until you have loaded the USB driversusing the enclosed CD-ROM.Step 1: Load USB DriversPlace the enclosed USB Driver CD-ROM into yourcomputer’s CD-ROM drive.If the CD-ROM does not start automatically, click Startand then Run…. Type the letter of your CD-ROM drivefollowed by setup (for example D:\setup). Then pressEnter.Follow the instructions on your computer screen.Step 2: Plug in the USB cable:1. Connect the power cable.2. Lift the bottom flap of the weather cap.3. Plug the mini-USB connector into the connectoron the back of the 2720, under the weather cap.4. Plug the other end of the cable into an availableUSB connector on your computer.