Garmin Rino 110 Quick Start Manual

Also see for RINO 110 - Hiking GPS Receiver: Technical spesification Features Specification Owner's manual and reference guide Owner's manual

Contents

quick start guide

Garmin Rino 110 Quick Start Manual Manual pdf 1 page image

Marking a WaypointMarking a waypoint is simply capturing your current location andstoring it in the unit’s memory. The unit must be turned on andtracking satellites to mark a waypoint.To mark a waypoint:1. Press the Thumb Stick In and hold it until the ShortcutsMenu is displayed.2. Highlight Mark Waypoint and press the Thumb Stick In todisplay the Mark Waypoint Page shown below.Mark Waypoint PageNameFieldSymbol Field3. Highlight the Name field and press the Thumb Stick In. Entera new name. When finished, highlight OK then press theThumb Stick In.4. Highlight the Symbol field and press the Thumb Stick In.Choose a symbol then press the Thumb Stick In to acceptthe selection.5. Highlight the OK button at the bottom of the page and pressthe Thumb Stick In to save the waypoint.Creating a Breadcrumb TrailAs you move, notice that a breadcrumb trail of your path is left onthe map. This trail is called a Track Log. You can use the track log toretrace your steps back to a certain location.To view your breadcrumb trail (track log):1. Use the Page button to display the Map Page.2. Walk away from your original location for at leastthree minutes.3. The default zoom level is 80 miles. Press the Zoom button tozoom in to view the breadcrumb trail (track log) in detail.Sending a LocationYou can send any location that you have available in your Find ‘NGo menu. These may be waypoints, contacts, cities, exits, or anyother data that is loaded in the unit. Below are the steps to send awaypoint.To send a location (waypoint) using Find ‘N Go:1. Press the Thumb Stick In and hold ituntil the Shortcuts Menu is displayed,or press the Page button until theMain Menu is displayed.2. Highlight Find ‘N Go and press theThumb Stick In. Highlight Way-points and press the Thumb StickIn. Select Nearest or By Name andpress the Thumb Stick In.3. Highlight the waypoint that you want to send and press theThumb Stick In to display the Waypoint Review page.4. Highlight the Option Menu button and press the ThumbStick In.5. Select Send Location and press the Thumb Stick In.The location is sent to all Rinos on the same channel and squelchcode as you. They can then choose to Goto that location, view thelocation on the map (Map), or save the location (OK).Using Peer-to-Peer PositioningThe Rino’s most unique feature is Peer-to-Peer positioning, send-ing the location of one Rino unit to other Rino units. Peer-to-Peerpositioning allows you to track the movement of other Rino usersand even navigate to their location.To send your location:Press and release either the Call or Talk button. Your Rino110 automatically sends out its location. Other Rino usersmonitoring the same channel and squelch code receive thisinformation.Using Find ‘N GoUsing Find ‘N Go, you can search for a waypoint and then create astraight-line route to it from your current location.To find and go to a waypoint:1. Press and hold the Thumb Stick In to access the ShortcutsMenu.2. Highlight Find ‘N Go and press In.3. Highlight Waypoints and press the Thumb Stick In. SelectNearest from the pop-up menu4. Use the Thumb Stick to select the desired waypoint from thelist and then press In to display the Information Page for thatwaypoint.5. Highlight Goto and press In to create a straight-line route tothe waypoint from your current location.Polling a LocationIf you have not heard from a contact in a while and would like toknow that contact’s current location, you may “poll” the contact’slocation. This will update that contact’s location in your Rino 110.To poll a location:1. Press the Thumb Stick In andhold it until the Shortcuts Menuis displayed, or press the Pagebutton until the Main Menu isdisplayed.2. Highlight Find ‘N Go and pressthe Thumb Stick In. HighlightContacts and press the ThumbStick In.3. Highlight the contact that you want to poll and press theThumb Stick In to display the Contact Review page.4. Highlight the Option Menu button and press the ThumbStick In.5. Select Poll Location and press the Thumb Stick In.If you have further questions or just want to learn more about theoperation of Rino 110, refer to the Owner’s Manual, which providesdetailed information about all of your Rino 110’s features.Quick Start GuideRino ® 110Step-by-Step Instructionsto Get You Started(Turn this page and begin with Step 1)Part Number 190-00251-01 Rev. CNavigating with Your Rino 110You can navigate to a waypoint, city, exit, or a contact’s location.Using optional detailed maps, you can also navigate to points ofinterest, addresses, and intersections.To begin navigation using Find ‘N Go:1. Press the Thumb Stick In to display the Shortcuts Menu.2. Highlight Find ‘N Go and press the Thumb Stick In.3. Highlight Waypoints and press the Thumb Stick In. Selectthe desired option (by Nearest or by Name), and press theThumb Stick In.4. Highlight the desired waypoint and press the Thumb Stick In.5. With the Waypoint Page displayed, highlight the Goto buttonat the bottom of the page and press the Thumb Stick In tobegin navigation. The Navigation Page automatically opensto guide you to your destination. See below for moreinformation.Navigation PageThe two main components of the NavigationPage are the compass ring and the pointer. Asyou move, the compass ring rotates showingyour current direction of travel at the top ofthe display. The pointer points toward yourdestination. When the pointer is aligned withthe vertical line at the top of the compass ring,you are on a direct course toward your destina-tion. The unit has to be moving to navigate. If you are standing stillor moving very slowly, the navigation data may not be accurate.Using ContactsThe first time you receive a signal from another Rino user, the NewContact page is displayed. From the New Contact page you canshow the user’s location on your Map, Goto that position, select OKto add them to your contact list, or press thePage/Quit button to disregard the contact.Every time you receive signals fromcontacts, your map is updated showing theirnew position. A Track Log of their move-ment is created and shown on your map.Navigation PageNew Contact PagePolling a contact’s locationPower button:• Press and hold to turn theunit On/Off• Press to adjust contrastand backlightingCall button:• Press to send out Call Tone• Sends position whenreleased (if enabled)Talk button:• Press and hold to talk• Sends position whenreleased (if enabled)Page/Quit button:• Press to cycle throughmain pages• Used to quit or escapemenu itemsVolume (V) button:• Press to open volumecontrol window Microphone:• Hold unit 3–4 inchesaway when talkingZoom/Map (Z)button:• From the Map Page,press to open Zoomcontrol window• From any otherpage, press todisplay Map PageSpeakerThumb Stick• Press In to enterhighlighted optionsand to confirmmessages• Move Up, Down,Right or Left tomove through lists,highlight fields,on-screen buttons,icons, enter data,or move the mappanning arrow• Press In and holdto display ShortcutsMenu.Send Location

/ 2

Related manuals for Garmin RINO 110 - Hiking GPS Receiver