Garmin RV-IN1501 Installation Instructions Manual

Also see for RV-IN1501: Owner's manual

Contents

Garmin RV-IN1501 Installation Instructions Manual Manual pdf 2 page image

RV-IN1501RV INFOTAINMENT SYSTEMINSTALLATIONINSTRUCTIONSImportant Safety InformationWARNINGSee the Important Safety and Product Information guide in theproduct box for product warnings and other importantinformation.NOTICEFailure to follow these cautions could result in damage to thevehicle or poor product performance.This device must be installed according to these instructions.Disconnect the vehicle's power supply before beginning to installthis product.Before applying power to this product, make sure it has beencorrectly grounded according to the installation instructions.You must read all installation instructions before beginning theinstallation. If you experience difficulty during the installation,contact Garmin®Product Support.Connector IdentificationItem Label Description Connector DetailsZONE 1LINE OUTLine outconnectors forzone 1Left (white), right (red), andsubwoofer (orange)RCA connectorsZONE 2LINE OUTLine outconnectors forzone 2Left (white), right (red), andsubwoofer (orange)RCA connectorsNone Wiring harnessconnectorsConnects to the included andoptional wiring harnessesNone AM/FM antennaconnectorConnects to either the vehicle'sAM/FM antenna cable or aninline adapter attached to thevehicle's AM/FM antenna cableSiriusXM SiriusXM®port Connects to a compatibleSiriusXM Connect vehicle tunerand antenna (sold separately)USB (500 mA) Reserved for manufacturer useCompatible only with low-current (<500 mA) USB devicesiPhone/iPod USB (1 A) Interfaces with and chargessupported smartphones andUSB devicesAUX 1INPUTAuxiliary input 1 Left (white) and right (red) RCAconnectorsItem Label Description Connector DetailsCAMERAAUDIOINPUT/AUX2 INPUTInput for cameraaudio or forauxiliary 2Left (white) and right (red) RCAconnectorsNone Ethernet port Connects to a FUSIONPartyBus™ networkCAN 1 CAN BUS 1 Connects to RV control systemsusing an adapter (soldseparately)CAN 2 CAN BUS 2 Reserved for vehicleintegration. Connects to thechassis CAN system using anadapter cable to supportsteering wheel controls.MIC Microphone input 3.5 mm mono microphone portConnects to the includedmicrophone for hands-freecalling and voice inputNone GPS antenna Connects to the included GPSantennaVIDEO IN Analog cameravideo input4 RCA video connectorsConnects to up to four vehiclecameras, including forward, leftmirror, right mirror, and backupcameras.Wiring HarnessesPower and Speaker Wiring HarnessThe power and speaker wiring harness contains the main powerand speaker connections for the system. The harness connectsdirectly to the stereo and to the vehicle wiring harnesswithout modification. You can use this diagram to troubleshootor to address non-default installation requirements.WireColorFunction NotesYellow Power (+) Connects to the positive terminal of a12 Vdc power source capable ofsupplying 15 A.Red Ignition power Connects to a separately-switched,12 Vdc connection, such as an ignitionbus, to turn the stereo on and off.Orange Illumination Connects to the vehicle's illuminationwire to dim the stereo screen when theheadlights are on. The gauge of theillumination wire must be suitable for thefuse supplying the circuit it is connectedto.NOTE: This wire is not used for allvehicles.Black Ground (-) Connects to the negative terminal of a12 Vdc power source capable ofsupplying 15 A. You should connect thiswire before connecting the yellow wire.All accessories connected to the stereomust share a common ground location.Blue Amplifier on Connects to optional external amplifiers,enabling them to turn on when thestereo turns on.2

/ 4

Related manuals for Garmin RV-IN1501