GVN 53 Owner’s Manual 5VieWinG the MaP and USinG the tooLSGPS Info PagePress the Menu button twice and select navigation >GpS Info to view GPS satellite information.Sky vewSatellte sgnalstrength barsThe sky view shows the satellites you are receiving. Thesatellite signal strength bars indicate the strength of eachsatellite you are receiving. A solid bar indicates the GPSsatellite is ready for use.GPS SettingsPress Menu three times to open the Settings menu.Select General > GpS. You can also access the GPSSettings by selecting the GpS Settings button on theGPS Info page.Use Indoors—select Yes to turn the GPS receiver off.Set position—set your position, if Use Indoors isenabled. Select your location on the map and then selectoK.WAAS/EGnoS—disable and enable WAAS/EGNOS.WAAS and EGNOS are systems of satellites and groundstations that provide GPS signal corrections, giving youeven better position accuracy. To learn about WAAS andEGNOS, visit www.garmin.com/aboutGPS/waas.html.