Garmin GPSMAP 60CSx Quick Manual

Also see for GPSMAP 60CSx: Owner's manual Owner's manual Quick start guide Owner's manual Declaration of conformity

Contents

quick guide

Garmin GPSMAP 60CSx Quick Manual Manual pdf 1 page image

Quick Guideto GarminGPSMAP60CSx1. Turn on using the power button on the top of the unit (see picture). Hold if for a fewseconds.2. Find satellites by placing the unit outside and waiting until it gets a fix. Can take a fewminutes at first. Note the accuracy distance drop. Let it go til it gets to about 3 to 5metres.3. Check co-ordinate system. Should say NZTM in the top window (left of the co-ordinates). If it doesn’t, see set co-ordinates below.4. Page options. Use the Page button to toggle around the various page options (satelliteswith coordinates, compass, map, etc), and just take a good look and get used to the infoon them. Walk around and see how their info changes. The little in/out buttons and theup-down-left-right buttons let you zoom to desired location on the map (your location isthe black triangular arrow).5. Mark ‘Home’. For safety, always mark where your car is parked/ the trail head so you canfind your way back if you get lost. Press Mark (bottom left key), and if you press thedown arrow once it will jump you to the top of the page where you can re-name thewaypoint by pressing Enter and using up-down arrows to type in HOME (Enter after eachletter selected), followed by OK and Enter again. Page again to whatever screen you wantto look at.6. Set up track log (make a cookie crumb trail of where you walk). Wait until you are at thestart of where you want to record your route. Use the Page button until you get to thepage with the little square icons and press Enter to select Tracks. Make sure the TrackLog is turned on – use the left-right button to select the On option. If it is already on, use

/ 2

Related manuals for Garmin GPSMAP 60CSx