Garmin GPSMAP 3005C Owner's Manual

Also see for GPSMAP 3005C: Installation instructions Installation instructions Quick reference guide Template manual Quick reference

Contents

Garmin GPSMAP 3005C Owner's Manual Manual pdf 20 page image

12 GPSMAP 3005C Owner’s ManualBASIC OPERATION > C REATING AND USING WAYPOINTS4. Some items have a Filter List button that allows you to enter letters ornumbers of the item name. The search result shows only items matchingthe entered letters or numbers. Highlight the Filter List button, and pressENTER. Enter data, as needed, to narrow your search.To find an item from another location on the map:1. Open the Map Page. Use the ROCKER to pan to the location you want,and then press FIND. The Find From (Location) Page appears.2. Using the ROCKER, highlight a category, and press ENTER.To view details about an item:Highlight an item in the search results list, and press ENTER. The ReviewPage appears, showing item information, map location, chart name,distance/bearing, and options for creating a waypoint or viewing the nextitem in the search results list.IteminformationDistance,bearing,chart nameof itemSoft keyCreating and Using WaypointsThe GPSMAP 3005C stores up to 4,000 alphanumeric waypoints, each with auser-defined icon, comment, depth, and water temperature.NOTE: If you are using an optional Garmin GSD 20, GSD 21, or GSD 22sounder module, the Depth and Water Temp fields fill in automatically.You can create waypoints using three basic methods:• ENTER/MARK—use the ENTER/MARK key to quickly mark yourcurrent location.• Graphically—use the map display to define a new waypoint location.• Manually—enter new waypoint coordinates manually.Creating Waypoints Using the ENTER/MARK KeyUse the ENTER/MARK key to capture your current location (or pointer or mapitem location) to create a new waypoint. You must have a valid position fix tomark your current location.To mark your current location:1. Press and hold ENTER/MARK until the Review Waypoint Page appears.The GPSMAP 3005C captures its current location and creates a defaultname and symbol for the new waypoint.2. To accept the waypoint with the default name and symbol, press ENTER.To change any of the available waypoint information, see page 15.