Garmin GPSMAP 190-01120-00 Owner's Manual

Also see for GPSMAP 6008: Technical reference Important safety information Supplement Owner's manual Declaration of conformity

Contents

Garmin GPSMAP 190-01120-00 Owner's Manual Manual pdf 123 page image

GPSMAP® 6000/7000 Series Owner’s Manual 7AppendixNMEA 0183 and NMEA 2000A GPSMAP 6000/7000 series chartplotter can accept data from both NMEA 0183 compliant devicesand certain NMEA 2000 devices connected to an existing NMEA 2000 network on your boat.NMEA 0183The NMEA 0183 data cable included with each GPSMAP 6000/7000 series chartplotter supports theNMEA 0183 standard, which is used to wire various NMEA 0183-compliant devices, such as VHFradios, NMEA instruments, autopilots, wind sensors, and heading sensors.A GPSMAP 6000/7000 series chartplotter can receive data from up to four NMEA 0183-compliantdevices and send GPS data to up to six NMEA 0183-compliant devices.To wire the GPSMAP 6000/7000 series chartplotter to optional NMEA 0183-compliant devices, seethe GPSMAP 6000/7000 Series Installation Instructions.Approved NMEA 0183 SentencesGPAPB, GPBOD, GPBWC, GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE,GPVTG, GPWPL, GPXTE, and Garmin proprietary sentences PGRME, PGRMM, and PGRMZ.This chartplotter also includes support for the WPL sentence, DSC, and sonar NMEA 0183 inputwith support for the DPT (depth) or DBT, MTW (water temp), and VHW (water temp, speed, andheading) sentences.Configuring NMEA 0183 Output SentencesYou can configure how the chartplotter sees NMEA 0183 output sentences.1. From the Home screen, select Configure > Communications > NMeA 0183 Setup > outputSentences.2. Select a setting: Sounder, Route, System, or Garmin.3. Select one or more NMEA 0183 output sentences.4. Repeat steps 2 and 3 to configure additional settings.Setting the Communication Format for Each NMEA 0183 PortYou can configure the input/output format for each port to use when connecting your chartplotter toexternal NMEA devices, a computer, or other Garmin devices.1. From the Home screen, select Configure > Communications > NMeA 0183 Setup > Porttypes.2. Select an input or output port.3. Select an input/output format:Select NMeA Std. to support the input or output of standard NMEA 0183 data, DSC, andsonar NMEA input support for the DPT, MTW, and VHW sentences.Select NMeA High Speed to support the input or output of standard 0183 data for most AISreceivers.Select Garmin to support the input or output of Garmin-proprietary data for interfacing withGarmin software.4. Repeat step 3 to configure additional input/output ports.•••