27Using FindReference5. Use the ROCKER KEYPAD and ENTER to spell the name of the desired waypoint,city or point of interest on the top line of the page (pressing ENTER after eachletter/number is selected).6. As you enter each letter/number, the list below is continuously updated to displayany matches in the data. You may find that only the first few letters/numbers areneeded to diplay the desired item. You can quickly exit the editing function andjump to the list below by highlighting ‘OK’ and pressing ENTER. Otherwise, spellout the entire name, then use the ROCKER KEYPAD to highlight ‘OK’ and pressENTER.7. Use the ROCKER KEYPAD to highlight the desired item from the list (if not alreadyhighlighted) and press ENTER. A pop-up window will appear with additionalinformation for the selected waypoint, city or point of interest.8a.To navigate to the selected waypoint, city or point of interest: use the ROCKERKEYPAD to highlight the on-screen ‘Goto’ button and press ENTER. Then use theROCKER KEYPAD to select your routing preference and press ENTER.or,8b.To view the selected waypoint, city or point of interest on the map: use the ROCKERKEYPAD to highlight the on-screen ‘Map’ button and press ENTER. Then use theIN/OUT zoom keys to select the desired map scale.or,8c. To exit the information page: use the ROCKER KEYPAD to highlight the on-screen‘OK’ button and press ENTER.NOTE: For waypoints, an on-screen ‘Delete’ button also appears, allowing you todelete the selected waypoint.Once you locate the item of your choice, pressENTER to display the Waypoint InformationPage for that item.An example the detail found on the WaypointInformation Page. Press ENTER with theon-screen ‘Goto’ button highlighted to navi-gate to the location.