190-00516-00 GPS 10 Technical Specifications Rev. BPage 123.2.2 Transmitted TimeThe GPS sensor outputs UTC (Coordinated Universal Time) date and time of day in the transmittedsentences. Before the initial position fix, the on-board clock provides the date and time of day. After theinitial position fix, the date and time of day are calculated using GPS satellite information and aresynchronized with the one-pulse-per-second output.The GPS sensor uses information obtained from the GPS satellites to add or delete UTC leap seconds andcorrect the transmitted date and time of day. The transmitted date and time of day for leap secondcorrection follow the guidelines in National Institute of Standards and Technology Special Publication 432(Revised 1990). This document is for sale by the Superintendent of Documents, U.S. Government PrintingOffice, Washington, D.C., 20402, U.S.A.When a positive leap second is required, one second is inserted at the beginning of the first hour (0h 0m 0s)of the day that the positive leap is occurring. The minute containing the leap second is 61 seconds long. TheGPS sensor would have transmitted this information for the leap second added December 31, 1998 asfollows:$GPRMC,235959,A,3851.3651,N,09447.9382,W,000.0,221.9,071103,003.3,E*69$GPRMC,000000,A,3851.3651,N,09447.9382,W,000.0,221.9,081103,003.3,E*67$GPRMC,000000,A,3851.3651,N,09447.9382,W,000.0,221.9,081103,003.3,E*67$GPRMC,000001,A,3851.3651,N,09447.9382,W,000.0,221.9,081103,003.3,E*66If a negative leap second should be required, one second will be deleted at the end of some UTC month.The minute containing the leap second will be only 59 seconds long. In this case, the GPS sensor will nottransmit the time of day 0h 0m 0s (the ìzeroî second) for the day from which the leap second is removed.$GPRMC,235959,A,3851.3650,N,09447.9373,W,000.0,000.0,111103,003.3,E*69$GPRMC,000001,A,3851.3650,N,09447.9373,W,000.0,000.0,121103,003.3,E*6A$GPRMC,000002,A,3851.3650,N,09447.9373,W,000.0,000.0,121103,003.3,E*693.2.3 Global Positioning System Almanac Data (ALM)Almanac sentences are not normally transmitted. Almanac transmission can be initiated by sending theGPS sensor a $PGRMO,GPALM,1 command. Upon receipt of this command, the GPS sensor will transmitavailable almanac information on GPALM sentences. During the transmission of almanac sentences, otherNMEA 0183 data output will be suspended temporarily.$GPALM,<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>,<10>,<11>,<12>,<13>,<14>,<15>*hh can be found in Section 3.1.1 Almanac Information (ALM).3.2.4 Global Positioning System Fix Data (GGA)$GPGGA,<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>,M,<10>,M,<11>,<12>*hh<1> UTC time of position fix, hhmmss format<2> Latitude, ddmm.mmmm format (leading zeros will be transmitted)<3> Latitude hemisphere, N or S<4> Longitude, dddmm.mmmm format (leading zeros will be transmitted)<5> Longitude hemisphere, E or W<6> GPS quality indication, 0 = fix not available, 1 = Non-differential GPS fix available, 2 =Differential GPS (DGPS) fix available, 6 = Estimated<7> Number of satellites in use, 00 to 12 (leading zeros will be transmitted)<8> Horizontal dilution of precision, 0.5 to 99.9<9> Antenna height above/below mean sea level, -9999.9 to 99999.9 meters<10> Geoidal height, -999.9 to 9999.9 meters<11> Differential GPS (RTCM SC-104) data age, number of seconds since last valid RTCMtransmission (null if not an RTCM DGPS fix)<12> Differential Reference Station ID, 0000 to 1023 (leading zeros will be transmitted, null if not anRTCM DGPS fix)