Garmin GHP 10V Marine Autopilot System Owner's Manual

Also see for GHP 10: Installation instructions Installation instructions Declaration of conformity Reference Configuration notes

Garmin GHP 10V Marine Autopilot System Owner's Manual Manual pdf 12 page image

Powerboat Autopilot Operation8 GHC 10 Owner’s ManualThe autopilot follows the man overboard pattern, and the heading screenshows the direction of the turn ➀.➀TIP: To quickly resume a pattern after you make a heading adjustment withthe helm or the soft keys (page 3), select the center soft key twice.Cancelling a steering PatternWhile following a steering pattern, perform one of the following actions:• Physically steer the boat at the helm (if your autopilot is equippedwith Shadow Drive).• Use the soft keys to manually adjust the heading.• Select STBY.gPs steering Patterns‹ CaUTIOnYou are responsible for the safe operation of your boat. Do not begin a GPSpattern until you are certain that the water is clear of obstacles.The autopilot can steer the boat along a route defined by your GPS device,or in preset patterns based on a GPS location (waypoint). To use GPSsteering, you must have a compatible GPS device connected to the autopilotusing NMEA 2000 or NMEA 0183. For more information on connecting acompatible GPS device, see the autopilot installation instructions.GPS steering patterns are based on a GPS waypoint to which you areactively navigating using your optional GPS device. This waypoint is calledthe active waypoint.