Garmin GHC 10 Instructions Manual

Also see for GHC 10: Quick start manual Declaration of conformity Instructions Template Owner's manual

Garmin GHC 10 Instructions Manual Manual pdf 1 page image

Printing a Mounting TemplateNoticeThese instructions for printing a mounting template must be followed precisely. Failure to do so may result in incorrect dimensions on thetemplate and an incorrect cutout (too large or too small) on the mounting surface of your boat.To print the attached mounting template, check the dimensions of the template and select the appropriate size of paper. Both the length andwidth measurements are indicated on the template.The paper size must be larger than the dimensions of the template. Select the paper size using the Properties button in the Adobe Acrobat printdialog box.Select Auto-Rotate and Center to ensure the template prints in the correct orientation.ImPoRtAnt: When printing the flush mount template, set Page Scaling in the Adobe Acrobat print dialog box to none.Page Scaling:Select None:Auto-Rotate and Center:Select with a check markfor correct orientationProperties: Selectthe paper size.Paper size (example):Use appropriate size paper.NoticeAfter printing and before cutting the mounting surface, measure the printed template to ensure both the length and the width printed at thecorrect size and to ensure that the dimensions of the printed template match the actual size of your mount. Garmin is not responsible for anydamages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.

/ 2

Related manuals for Garmin GHC 10