Garmin aera 660 Pilot’s Guide190-02017-20 Rev. EAppendix D177Overview Navigation Flight Planning Hazard Avoidance Additional Features Appendices IndexSecuring the cable on the top of the yoke mount:1) Remove the screws securing the cable clamp.2) Orient the cable and secure the clamp with the screws.Cable ClampRemoving the yoke mount from the yoke shaft (or control arm):1) Disconnect the cable connectors from the aircraft.2) Loosen the clamp by turning the Clamp Adjustment Knob until the clampassembly can be easily removed from the yoke shaft or control arm.CONNECTING TO A GARMIN VHF COMM RADIOThe aera 660 can also output frequency data to a Garmin aviation radio. Foradditional information refer to the applicable installation manual. Currently thefollowing models are supported:s SL30 NAV/COMM s GNC 255s SL40 COMM s GTR 200s GTR 225NOTE:For additional information refer to the SL30 NAV/COMM, SL40 COMM,GTR 225, GNC 255, or GTR 200 installation manual.CAUTION: This interface does not have an FAA installation airworthinessapproval. If any tuning or operational abnormalities are encountered with theSL30 nav/comm, SL40 comm, GTR 225, GNC 255, or GTR 200, disconnect theaera 660 from the applicable tuning interface.
