Garmin 45 Owner's Manual

Also see for Drivesmart 55: Declaration of conformity Owner's manual Owner's manual Owner's manual

Contents

Garmin 45 Owner's Manual Manual pdf 7 page image

The Dash Cam displays the network name and networkpassword.3 From your mobile device, select the Dash Cam Wi‑Fi®network.4 Enter the network password.Your Dash Cam shares saved photos and video to yourmobile device.5 On your mobile device, launch the Garmin VIRB app.Updating the Camera Using the Garmin VIRB AppYou can update the camera software using the Garmin VIRBmobile app. After you pair the app with your camera, the appchecks for updates automatically and displays a message whenan update is available.1 From the Garmin VIRB app, when an update is available,select Download.2 Follow the on-screen instructions to complete the updateprocess.Deleting a Video or Photo• While viewing a video, select > Delete > Yes.• While viewing a photo, select > Yes.Videos and Photos on Your ComputerNOTE: Some media players might not support high-resolutionplayback.Videos and photos are stored in the DCIM directory on thecamera memory card. Videos are stored in MP4 file format, andphotos are stored in JPG format. You can view and transferphotos and videos by connecting the memory card or the deviceto your computer (Connecting the Device to Your Computer,page 2).The videos and photos are sorted into several folders.100EVENT: Contains videos saved automatically when thedevice detects an incident.101PHOTO: Contains photos.102SAVED: Contains videos saved manually by the user.103PARKM: Contains videos saved while parked.104TLPSE: Contains Travelapse videos.105UNSVD: Contains unsaved video footage. The deviceoverwrites the oldest unsaved video when the storage spacefor unsaved videos is full.Video Resolution SettingsYou can change the video resolution on your camera.Resolution is the height of the video in pixels. Higher resolutionvideo settings require more memory card space than lowerresolution settings.Select Settings > Camera > Resolution.1440p, 30fps: Records video in 1440p resolution at 30 framesper second.NOTE: 1440p resolution at 30 frames per second is notavailable for the Garmin Dash Cam 45 product model.1080p, 60fps: Records video in 1080p resolution at 60 framesper second.NOTE: 1080p resolution at 60 frames per second is notavailable for the Garmin Dash Cam 45 product model.1080p, 30fps, HDR: Records video in 1080p resolution at 30frames per second using high dynamic range (HDR) imaging.HDR imaging records multiple exposure levels for each frameand can improve video clarity in high contrast or low-lightconditions.NOTE: 1080p resolution at 30 frames per second using highdynamic range (HDR) imaging is not available for the GarminDash Cam 45 product model.1080p, 30fps: Records video in 1080p resolution at 30 framesper second.720p, 30fps: Records video in 720p resolution at 30 frames persecond.TravelapseThe Travelapse feature captures a fast-motion video of your trip,which allows you to share a short video of all the places youtraveled.NOTE: Recording Travelapse does not stop dash camrecording.Voice ControlNOTE: The voice control feature is not available for the GarminDash Cam 45 product model.The voice control feature allows you to control your camera bysaying words and commands.NOTE: The voice control feature is not available for alllanguages. You can use this feature while the interface is set toan unsupported language, but you must speak the commands inEnglish.Controlling the Camera Using VoiceCommandsNOTE: The voice control feature is not available for the GarminDash Cam 45 product model.1 Say OK, Garmin to activate the voice control feature.The camera plays a tone and starts listening for a command.2 Say a command:• To save a video, say Save Video.• To take a picture, say Take a Picture.• To record audio with the video, say Record Audio.• To record video without audio, say Stop Audio.• To start Travelapse, say Start Travelapse.• To stop Travelapse, say Stop Travelapse.The camera plays a tone when it recognizes your command.Turning Voice Control On or OffSelect > Voice Control > Settings > Disable.Voice Control Tips• Speak in a normal voice directed at the device.• Reduce background noise to increase the accuracy of thevoice recognition.• Before each command, say OK, Garmin.• Listen for a tone to confirm that the camera successfullyrecognized a command.Red Light and Speed CamerasNOTICEGarmin is not responsible for the accuracy of or theconsequences of using a red light or speed camera database.NOTE: This feature is not available for all regions or productmodels.Information about red light and speed camera locations isavailable in some areas for some product models. The deviceTravelapse 3