Garland GMIU3.5 Installation And Operation Manual

Contents

Garland GMIU3.5 Installation And Operation Manual Manual pdf 12 page image

Part # 4520897 (01/31/08)Page 12TROUBLE SHOOTING ContinuedTroubling Shooting GuideFault Possible Cause Action to take through operator oroperating personnelNo heating indicator operation is OFF(dark)No electrical supply Check if the electrical supply (cableplugged in the wall socket), checkpreliminary fusesControl in off-position Push control onPan too small (bottom diameter lessthan 5” (127 mm )Use a suitable panPan is not placed in the center of theheating area (the cooker can’t detectthe pan)Move the pan to the center of theheating areaUnsuitable pan Choose a pan which is recommendedfor induction cooking *Cooker defective Ask your supplier for repair service,unplug the cooker from the electricalsupplyPoor heating, indicator operation is ON(shines)Used pan is not ideal Use a pan which is recommended forinduction cooking, compare resultswith ‘your’ panAir-cooling system obstructed Verify, that air inlet and air outlet arenot obstructed with objectsAmbient temperature is too high (thecooling system is not able to keep thecooker in normal operating conditions**Verify, that no hot air is sucked in by thefan. Reduce the ambient temperature.The air inlet temperature must be lowerthan 40ºC/110ºFOne phase is missing (only with threephase supply)Check preliminary fusesCooker defective Ask your supplier for repair service,unplug the cooker from the electricalsupplyNo reaction to control knob positions Control knob defective Ask your supplier for repair service,unplug the cooker from the electricalsupplyHeating cycle switches off and onwithin minutes, fan is activeAir inlet or outlet obstructed Remove objects from air inlet and airoutlet slots, clean the slotsGrease filter is dirty Clean grease filterHeating switches off and on withinminutes, fan is never activeFan defective Ask your supplier for repair serviceFan control defective