Gardner Denver THOMAS SK927 Quick Start Manual

Gardner Denver THOMAS SK927 Quick Start Manual Manual pdf 1 page image

MODEL SK927COMPRESSOR SERVICE KITCAUTION: Improper assembly or use of damaged parts may lead topremature failure. To avoid frequent repairs follow these assemblyprocedures.NOTE: Before you begin read these instructions thoroughly. Assemble thenecessary tools. You will need a flat tip and phillips head screw driver as well as aT-20 and T-25 Torx driver for a torque wrench.WARNING: Unplug the compressor before beginning disassembly.ALWAYS NOTE POSITION AND ORIENTATION OF PARTS AS REMOVEDTO ASSURE CORRECT POSITIONING WHEN REASSEMBLING.Part No.642650B 02/07 ©2007 Printed in U.S.AAll Rights ReservedFor service to 917/927 Series CompressorsFILTER REPLACEMENT1. Remove filter cap.2. Remove old filter and discard.3. Wipe inside of filter body and cap with a clean soft cloth.4. Place new filter inside of filter body.5. Replace cap.Filter CapFilterFilter Body621102 Valve FlapperIntake & Exhaust (2)633560 Gasket O-Ring625223 Valve PlateScrews (5)625540 DiaphragmHold Down Screws (4)625444 Head Screws(6)608212 Diaphragm625160 Valve FlapperScrews (2)641034 Filter617045 Valve KeeperStrip (2)3524 Washington Avenue, Sheboygan, WI 53081 USA(920) 452-4891 www.gd-thomas.com

/ 2

Related manuals for Gardner Denver THOMAS SK927