Menu
Gardener's supply company SunLite Assembly Instructions Manual
     | |
Contents | 
SunLite® Tabletop GardenAssembly InstructionsThere are four parts to assembling theSunLite Garden: Frame Assembly, BallChain Assembly, Adjusting the Fixtures, andInstalling the Light Tubes. With the help ofone other person, you can assemble the SunLiteTabletop Garden in less than an hour. The onlytools you’ll need are a Phillips screwdriver, ahammer or rubber mallet, and pliers.Frame AssemblyStep 1. Lay out all Frame Parts on a flat, cleansurface.Step 2. Connect an A4 Side Base Frame to theend of each A2 Bar using two Phillips-head bolts(Fig 2). Repeat this step to connect the second A4Side Base Frame to the other end of the A2 Bars.Do not fully tighten the bolts on the frame untilStep 4.Step 3. Connect the A1 Side Frames to the A4Side Base Frames by placing a Phillips-head boltup through the hole in the underside of the A4Frame. Make sure the nylon cleat on each A1 SideFrame is facing out (Fig. 2).A2 BarLight FixtureA4SideBaseFrameA1 Side Framewith CleatFig. 1Enlargedview ofcleatA1SideFrameA2BarsA4 SideBase FrameFig. 2Parts List Qty.Frame A1 Side Frames 2Parts: A2 Bars 2A3 Pulley Bars 1A4 Side Base Frames 2Additional Light Fixtures 1Parts: T-8 Light Tubes 3Poly Tray 1Hardware: Ball Chains 2Chain Connectors 4Split Rings,Large 2Split Rings,Small 2Bolts 8End Plugs 6BoltBolts |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved