Gardena A 1020 Sensor Operating Instructions Manual

Also see for A 1020 Sensor: Operating instructions User manual

Contents

Gardena A 1020 Sensor Operating Instructions Manual Manual pdf 7 page image

7GBSet watering programme :5. OperationWater Timer:To create the watering programme, the control panel can beremoved from the casing by pressing the unlock button sothat mobile programming is possible (see 4. Initial operation“ Connect adapter cable of the Soil Moisture Sensor ” ).The watering programme is run only if the Soil MoistureSensor reports “dry” to the Water Timer and the controlpanel has been properly plugged in. If the Soil MoistureSensor reports “damp” while the programme is running,watering is stopped.Watering controlled by Soil Moisture Sensor :1. Turn Frequency button F to the desired watering cycle(e.g. day).day Watering by day when the Soil Moisture Sensorreports “dry”.night Watering by night when the Soil Moisture Sensorreports “dry”.day & night Watering whenever the Soil Moisture SensorSensor reports “dry”.2. Turn Run Time button G to the desired watering duration (e.g.30 minutes).Watering starts within the set watering cycle.If watering is controlled by the Soil Moisture Sensor a wateringbreak of 2 hours is activated every time water has beendelivered (so, the soil moisture level can be balanced).Example :Watering cycle = (day),Watering duration = 30 minutes.Watering is activated when the Soil Moisture Sensor reports “dry”during the day, and stops depending on the soil moisture level, butfor no longer than the the set duration (in this example 30 minutes).Time-controlled watering :1. Turn Frequency button F to the desired watering cycle (e.g.12 hours).12h watering every 12 hours24h watering every day48h watering every 2 days2. Turn Run Time button G to Reset to enter the watering starttime (time of programming).3. Turn Run Time button G to the desired watering duration (e.g.15 minutes).G FG F