8ASSEMBLY INSTRUCTIONSHardware UsedHardware UsedHardware Used2IBB1. With the base (I) upside down, attachwheel assembly (J) using M8 x 15 mmbolts (AA) and M8 nuts (CC).2. Turn the base (I) right-side up, then attachcylinder assembly (H) using M5 x 8 mmblack bolts (BB) though preassembledL-pins.Note: The door on the cylinder assembly(H) should be on the opposite side of thewheel assembly (J).3. Attach pole assembly (D) to cylinderassembly (H) using M6 x 10 mm bolts (FF).Note: Ensure the pole assembly (D) isstraight. Then, use deck ring (G) to coverconnection.X 2X 2M8 NutM8X15mm BoltAACC1JKAA CCM8 x 15 mm BoltM8 Nut x 2x 2X 5BB M5 X 8mm BoltM5 x 8 mm Black Bolt x 5FF M5 X 10 mm Bolt X 4M6 x 10 mm Bolt x 4HFFDBack3