www.IGalaxyAppliances.com10 Combo Washer- Dryer Owner’s ManualINSTALLATIONUNPACKING, LEVELING, & POSITIONINGRemove the packing and check that the Washer-Dryer is undamaged. If you have any doubt,do not use the Washer-Dryer and call Customer Service. Keep all packing parts (plastic bag,foam rubber, screws, etc.) out of the reach of children since they could be dangerous.Important: The inside of the Washer-Dryer consists of a free floating drum that is affixedwith shipping bolts at the back of the cabinet (Fig.1) during transport. Before starting themachine, remember to remove the shipping bolts. Close the holes left open by the boltswith the plastic caps provided.It is important for the machine to be perfectly level. For this reason, the machine is fitted withadjustable feet used for leveling the machine before use (Fig.2).(Fig.1) (Fig.2)ELECTRICAL CONNECTIONConnect the plug to a power outlet – 110V/60Hz with minimum 15 Amps. Make sure that thevoltage and frequency available correspond with those stated on the serial number platelocated on the machine. Do not use adaptors or extension cords since they could result inoverheating and burn out.