Gaggia Milano NAVIGLIO HD8749 User Manual

Gaggia Milano NAVIGLIO HD8749 User Manual Manual pdf 8 page image

8ENGLISHUsing the machine for the first timeWhen using the machine for the first time, the following activities need to happen:1 You need to prime the circuit.2 The machine will perform an automatic rinse/self-cleaning cycle.3 You need to initiate a manual rinse cycle.Circuit primingDuring this process, fresh water flows through the internal circuit of the machineand the machine warms up. This takes a few minutes.1 Insert a container under the Classic Milk Frother.2 Press the “ ” button to start the cycle. The machine starts the automaticpriming of the circuit by dispensing some water through the Classic MilkFrother.3 When the process is complete, the“ ” and “ ” buttons will flash. Themachine is in the warm-up mode.Automatic rinse/self-cleaning cycleWhen warm-up is completed, the machine automatically performs a rinse/self-cleaning cycle of the internal circuits with fresh water. This takes less than aminute.4 Place a container under the dispensing spout to catch the small amount ofdispensed water.4219-450-01931 MANUAL GAG. NAVIGLIO HD8749 EN-ES-PT.indd 8 03/12/2018 12:33:07