• 23 •English• Insert the plug into a wall socket with suitable power volt-age.4.5 Circuit PrimingUpon first use, after dispensing steam or when the water tankis empty, the machine’s water circuit must always be primed.• (Fig.5) - Press the ON/OFF button (16); the indicator light(17) will turn on to indicate that the machine is on.• (Fig.6) - Place a container under the steam wand. Openthe "hot water/steam" knob (3) by turning it counter-clockwise.• (Fig.7) - Press the brew button (18).• Wait until a steady jet of water flows out of the steamwand (Pannarello).• (Fig.7) - Press the brew button (18) again to end the op-eration.• (Fig.8) - Close the "hot water/steam" knob (3) by turningit clockwise. Remove the container.The machine is now ready to brew coffee and dispense steam.Please see related chapters for operating details.4.6 Using the Machine for the First Timeor after a Period of InactivityThis simple operation ensures an optimum brewing and mustbe performed:- At first start-up;- When the machine remains inactive for a long time (morethan 2 weeks).Water dispensed during this process must beemptied into an adequate drain and is not suit-able for food use. If the container fills up during thecycle, stop dispensing water and empty the containerbefore resuming the operation.A (Fig.2) - Rinse the tank and fill it again with fresh drinkingwater.B (Fig.6) - Place a container under the steam wand. Openthe knob (3) slowly by turning it counter-clockwise.(Fig.7) - Press the brew button (18).C Dispense the whole water tank content from the steam/hot water wand.(Fig.7) - Press the brew button (18) again to end the op-eration.(Fig.8) - Close the knob (3) by turning it clockwise.D (Fig.2) - Fill the tank with fresh drinking water.E (Fig.15-16) - Insert the filter holder into the brew unit (8)from the bottom and turn it from left to right until it locksinto place.F Place a suitable container under the filter holder.G (Fig.18) - Press the brew button (18) and dispense all thewater in the tank. Once the water tank is empty, stop dis-pensing by pressing the brew button (18) again.At the end, empty the container.H (Fig.20) - Remove the filter holder from the unit by turn-ing it from right to left and rinse it with fresh drinking wa-ter.I The machine is now ready to be used.5 COFFEE BREWINGWarning! During the coffee brewing it is forbid-den to remove the pressurized filter holder bymanually turning it clockwise. Danger of burns.• During this operation the "machine ready" indicator light(19) may flash. This should be considered a standard op-eration, not a fault.• Before using the machine, make sure that the hot water/steam knob (3) is closed and that there is enough water inthe machine tank.• (Fig.5) - Press the ON/OFF button (16); the indicator light(17) will turn on to indicate that the machine is on.• Wait until the "machine ready" indicator light (19) turnson. The machine is now ready to brew coffee.Accessories for coffee brewing are placed ina specially designed seat to make operationseasy and immediate.If the ground coffee measuring scoop and/or the filtersare required, lift the cover (2) and take what you need(Fig.35 and Fig.36).If coffee is NOT brewed after pressing the brewbutton (18), press the brew button (18) againand check the "Troubleshooting" table before remo-ving the filter holder.5.1 Using Ground Coffee• (Fig.9) - Insert the filter (13) in the pressurized filterholder (11); the filter is already inserted when using themachine for the first time.• (Fig.15) - Insert the pressurized filter holder into the brewunit (8) from the bottom.4219-450-03731 MANUAL GRAN. GAG. IT-EN-DE-FR-ES-PT-NL-SV-NO-FI-DA-GR.indd 23 03/12/2018 12:19:22