Gaggenau RF463304 User Manual

Gaggenau RF463304 User Manual Manual pdf 14 page image

14en Operating the applianceDisplay lock for cleaningYou can use this function to switch off the touchfunction of the controls for 10 seconds. During this timeyou can clean the display.~ "Cleaning the display" on page 261 Press à button to open the main menu.2 Press ² button.The cleaning display appears and the countdown starts.Automatic display lock for cleaningYou can use this function to select whether the cleanlock is switched on automatically when the door isopened.1 Press à button to open the main menu.2 Press B button to move to the Basic settings menuitem.3 Press ™ button.4 Use B button to move to the Automatic displaylock for cleaning menu item.5 To change the setting, press % button.Switching ice cube production on andoffCaution!Damage to the appliance.Never store bottles or food in the ice cube container,even for short periods. This can block and damage theice maker.Ice cube production starts as soon as the appliance hasreached the set temperature.Note: Ice cube production stops automatically when theice cube container is full.Switching ice maker on or off1 Press à button to open the main menu.2 Use C button to move to the menu item Ice cubeproduction.3 Press ²/³ button.Eco modeEco mode switches the appliance to energy-savingoperation.The appliance automatically sets the followingtemperatures:▯ Freezer compartment: -16 /3 Switching Eco mode on or off1 Press à button to open the main menu.2 Press C button to move to the menu item Ecomode.3 Press ²/³ button.The temperature is changed and the display shows thenew temperature. When Eco mode is switched off, therecommended temperature is set.Note: You can also switch Eco mode on or off byadjusting the temperature with the A/@ buttons.Reset water filter counterIf you are using a water filter in your appliance insteadof the particle filter supplied, you have to reset the waterfilter counter whenever you have replaced the waterfilter.~ "Switching the water filter counter on and off"on page 161 Press à button to open the main menu.2 Use C button to move to the menu item Reset waterfilter counter.3 Press ™ button to confirm and confirm the queryagain with ™ button.Note: If you cancel the query or take longer than10 seconds to make an input, the water filter counterwill not be reset.