Gaggenau RF411304 User Manual

Gaggenau RF411304 User Manual Manual pdf 27 page image

27What to do in the event of a fault enIce maker--------The ice maker is not functioning.Ice cube production is switched off. Switch on ice cube production.Freezer compartment is too warm. Set the temperature lower.~ "Operating the appliance" on page 13Ice cube container is not properly inserted. Insert ice cube container fully.The ice maker is without power. Call Customer Service.~ "Customer Service" on page 28No water supply. Check water connection and contact technician if necessary.Low water pressure. Only connect appliance to pipes with sufficient water pres-sure.Kink in water hose. Turn off water supply, straighten out kink. Replace water hoseif necessary.Too few or deformed ice cubes, water pressure lower than usual.After switching on or removing many ice cubes, there will betoo few in the ice cube container.It takes around 24 hours for an empty ice cube container to fillup.Ice cube production stops even though the ice cube con-tainer is not yet full.Do not store the ice shovel on the ice in the ice cube con-tainer. Otherwise, the sensor will not detect the actual fill levelof the container.Low water pressure. Only connect appliance to pipes with sufficient water pres-sure.The water filter is blocked or needs to be replaced. Change water filter.Freezer compartment is too warm. Set the temperature lower.~ "Operating the appliance" on page 13Water is leaking out of the appliance.Water connection is not watertight. Check that the connections are fastened firmly and the waterhose is undamaged.If the water hose is damaged, contact Customer Service andhave it replaced. Replacement must be performed by Cus-tomer Service or a similarly qualified person.Use originalparts supplied by the manufacturer only.

/ 29

Related manuals for Gaggenau RF411304