Menu
Gabotronics XScopes User Manual
                                             |
XScopes User’s ManualDS-XScopes-3.5 – December, 2014 Page | 1Description:The XScopes (Xminilab and Xprotolab) are a combinationof three electronic instruments: a mixed signaloscilloscope, an arbitrary waveform generator, and aprotocol sniffer; all housed in a small breadboard friendlymodule. The XScopes can also be used as developmentboards for the AVR XMEGA microcontroller.Main Features: Mixed Signal Oscilloscope: Simultaneous sampling of2 analog and 8 digital signals. Arbitrary Waveform Generator with advanced sweepoptions on all the wave parameters. Protocol Sniffer: SPI, I2C, UART Advanced Triggering System: Normal / Single / Auto /Free, with many trigger modes; adjustable trigger level,and ability to view signals prior to the trigger. Meter Mode: VDC, VPP and Frequency readout. XY Mode: For plotting Lissajous figures, V/I curves orchecking the phase difference between two waveforms. Spectrum Analyzer with different windowing optionsand selectable vertical log and IQ visualization. Channel Math: add, multiply, invert, and average. Horizontal and Vertical Cursors with automaticwaveform measurements, and waveform references.GabotronicsPO BOX 110332Lakewood Rch, FL. 34211www.gabotronics.comFigure 1: Xprotolab, Xminilab, and the Portable modelsFigure 2: XScopes Block Diagram |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved