GEAppliances PWE23 Owner's Manual And Installation Instructions

Also see for DFE28: Owner's manual and installation instructions

GEAppliances PWE23 Owner's Manual And Installation Instructions Manual pdf 6 page image

About the controls with temperature settings.The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for thefreezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.The temperature controls can display both the SET temperature as well as the actual temperature in therefrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usageand operating environment.NOTE: The refrigerator is shipped with protective film covering the temperature controls.If this film was not removed during installation, remove it now.CubedExpress Mode SettingsPrecise FillControlLockLight Auto FillWater Crushed CubedTemperaturePFE28,PYE22P Control Style A, LCD External ControlGFE28, GFE26, DFE28, GYE22 Control Style B, External ControlGNE29, PWE23 Control Style C, Internal ControlRefrigeratorHold 3 Sec for °F/°CHold 3 SecondsHold 3 SecondsRecommended: 37 °FActual SetEnergy SmartEnergy Smart OverrideHold 3 SecondsFreezerDoor AlarmIce MakerLock ControlsReset FilterRecommended: 0°FF6