GEA F Series Assembly Instructions Manual

Contents

GEA F Series Assembly Instructions Manual Manual pdf 22 page image

22DGBFE09702-09.2013-DGbF7.6 Excerpt from the lubricant tableThe oil grade filled as standard in the factory is noted on the name plate. This oil grade should beused preferably. Alternatives to this are listed in the following excerpt from our lubricant table.Accessories available can be found in the F-Catalogue (Bock Ref.-No. 96023) oron the Internet at www.bock.de.7.5 AccessoriesType F2 NH3 F3 NH3 F4 NH3 F5 NH3F14/1166 NH3F14/1366 NH3F16/1751 NH3F16/2051 NH3Designation Ref. No.Set gaskets 08069 08070 08071 08072 08492 08493Shaft seal 08001 08001 08008 08008 08444 08012Valve plate set NH3 08841 08842 08842 08843 08844 08844Oil pump 08043 08043 08044 08044 08799 08799Oil sump heater 08423 08424 08425 08425 08426 08426Only use original Bock spare parts!7.4 Spare parts recommendation NH3NH37.7 Decommissioning7| MaintenanceRefrigerant Bock series oil grades Recommended alternativesHFKW(e.g. R134a,R404A/R507, R407C)Fuchs Reniso Triton SE 55FUCHS Reniso Triton SEZ 32ICI Emkarate RL 32 H, SMOBIL Arctic EAL 32SHELL Clavus R 32HFCKW(e.g. R22) Fuchs Reniso SP 46FUCHS Reniso, z.B. KM, HP, SP 32SHELL Clavus SD 22-12TEXACO Capella WF 46NH3Fuchs Reniso KC 68for flooded operationFuchs Reniso Synth 68for applications using a plateheat exchanger-Information on further suitable oils on request.Close the shut-off valves on the compressor. Drain the refrigerant (it must not be discharged into theenvironment) and dispose of it according to the regulations. When the compressor is depressurised,undo the fastening screws of the shut-off valves. Remove the compressor using an appropriate hoist.Dispose of the oil inside in accordance with the applicable national regulations.