GE Security Simon XT Installation Sheet

Also see for SIMON XT: User manual User manual User manual Quick user guide Installation manual

GESecurity60-924-3-XT-2WTTS Simon XTTouch Screen Installation SheetDescriptionThe Simon XT Talking Touch Screen (model 60-924-3-XT-2WTTS)features a color 3.5 inch LCD screen with a graphical userinterface designed to control basic functionality of the Simon XT(v1.3 or later) control panel. Up to four touch screens can belearned (programmed) into each Simon XT panel.The touch screen provides a convenient option for the followingsystem operations:• Arm the system (doors, windows, and motion sensors).• Disarm the system.• Activate a panic alarm to call the central monitoring station ina nonmedical emergency.• Check system status.• Turn system controlled lights on or off (depending on yoursystem configuration).• Hear voice feedback of the status of the Simon XT controlpanel.InstallationUse the following guidelines when adding this touch screen to theSimon XT system:• Program (learn) the touch screen into the control panel as asensor.• Program touch screens using sensor groups 00, 01, 04, 05, 06,or 07.• The touch screen will work best if mounted greater than 3 ft.(1.0 m) from the Simon XT panel.• Avoid mounting the touch screen directly behind the SimonXT panel on the opposite side of the wall.• Always do a sensor test before attaching the touch screen tothe wall.• Do not wrap the antenna into the backplate. Follow theinstructions to install the antenna into the wall.To program (learn) the touch screen into the panel:1. Press the down arrow button on the panel and scroll toSystem Programming.2. Press OK.The panel displays Enter Code.3. Enter the installer access code and press OK.4. Scroll to Sensors and press OK.5. When the panel displays Learn Sensor, press OK.The panel blinks Trip Sensor nn (where nn is the nextavailable zone number. You can enter a different zonenumber if desired.6. On the touch screen:A. Press the Settings button.B. Press the Down arrow until the Clear and Enroll buttonappears.C. Press the Clear and Enroll button.7. You can now program the group number (00, 01, 04, 05, 06,or 07) and press OK.8. Press the Up or Down arrow to select a name for the touchscreen and press OK. (Refer to the Simon XT installationinstructions for programming sensor text.)You can select something simple, such as “Touch Pad”, or useadditional descriptors, such as “Bedroom Touch Pad”.Note: During install mode, it is normal for the four blue LEDson the panel to blink as this indicates the panel is updatingthe touch screen status. Do not leave program mode if youhave modified sensor information or are downloading acompany logo while the four blue arming LEDs on the panelare blinking (this may disrupt configuration).9. To verify that the touch screen is programmed (learned),press the Status button on the panel repeatedly to leavesystem programming and return to normal panel operation.10. Press the Settings button on the touch screen and press theHear button.The touch screen should announce the panel arming leveland status, such as Disarmed System Okay.© 2010 GE Security, Inc.1 of 4P/N 466-2383 • REV A • ISS 02MAR10

/ 4

Related manuals for GE SIMON XT