GE Profile PVB98SN Dimensions And Installation Information

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.220967Specification Created 9/08Listed byUnderwritersLaboratoriesPVB98SNGE Profile™ 36" Telescopic Downdraft System2-1/8*8-1/2362-1/2" MIN.**34See tableVenting Options (in inches)Through the Floor In Cabinet Discharge (Down)In Cabinet Discharge (Right) In Cabinet Discharge (Left)Note: Telescopic downdraft vents are notrecommended to be installed with cooktops that areflush mounted.Approved for use with the following GE ProfilePerformance™, GE Profile™, and GE cooktops–36" and30" electric models, 36" and 30” gas sealed burnermodels and 36" and 30" induction models.Not Approved for use with standard burner gascooktops.Note: The cooktop must be at least 26" deep with aflat surface area of 23-1/2" or more, front to back. Inaddition, other clearances to the front edge of thecountertop must be considered.Note: Dimensions shown are for reference only. Beforecutting out countertop, refer to instructions packed withdowndraft and cooktop.Note: Installation on cabinets/countertops againstthe wall will not be possible in most applications.Against the wall installations are limited todimension requirements. Refer to installationinstructions packed with product for further details.JXBC67 Outdoor Cover. Optional accessory may beordered for installation of motor and blower assemblyon outside wall.JXRB67 Indoor Remote Accessory. Optionalaccessory may be ordered for installation of motorand blower assembly in an indoor remote location.Dimensions and Installation Information (in inches)

/ 3

Related manuals for GE GE Profile PVB98SN