Dimensions and Installation Information (in inches)PP932TM/KM/BMGE Profile™ Series 30" Built-In CleanDesign Electric CooktopFor answers to your Monogram ® or GE® appliancequestions, visit our website at geappliances.comor call GE Answer Center ® service, 800.626.2000.220585Listed byUnderwritersLaboratories†Note: Check local codes for required breaker sizeImportant: Requires a 5" free area between thebottom of the cooktop to any combustible material,i.e., shelving. Free area not required when installingwall oven underneath cooktop. Refer to installationinstructions. Requires a 15" minimum from cooktop toadjacent overhead cabinets. Units are furnished with a48" flexible armored cable.Note: 30" Ribbon cooktops are approved for use over select GE 27" and GE 30"Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for currentdimensional data. If installed with a GE Profile™ Telescopic Downdraft System,consult both the cooktop and downdraft installation instructions packed withproduct before installing. Cooktop gas/electric supply may need to be re-routedto install downdraft. Consult cabinet and countertop manufacturer’s specs forflush mount installation prior to install. Before installing, consult installationinstructions packed with product for current dimensional data.Filler Trim Kit: When replacing an old GE 30" cooktop (with larger opening)use the following one-piece trim kit to fill in the over-size hole. Available atadditional cost. JXTR32W (True White) JXTR32B (Black glass) JXTR32C(True Bisque)KW Rating240V 8.6208V 6.5Breaker Size240V 40 Amps †208V 40 Amps †Specification Revised 3/13