GE Optima XR220amx Operator's Manual

Also see for Optima XR220amx: Preinstallation manual Installation manual

GE Optima XR220amx Operator's Manual Manual pdf 76 page image

Appendix A: Login AdministrationOptima XR220amx X-Ray System 54400222-1EN Rev 1 DRAFT 11092010 A-18Operator Manual © 2010 General Electric Company. All rights reserved.Figure A-17 Remove GroupChange Group’s RolesOnce a group is highlighted, check or uncheck the checkboxes for the Roles you want to give to thisgroup, and press [Apply Roles]. There is a green label confirmation as usual for successfully applied roles.If there is a failure on the back-end (i.e. a problem writing the roles configuration changes), you willreceive an error message box with information.Add Memberships1. Once a group is highlighted, press [Add Membership]. This brings up a popup panel that lists all of the users that are eligible to be added to this group. Ifthere are no users eligible to be added to this group, you will get an error message box instead ofthe popup panel. Once you get the popup panel, simply select all of the users that you want to addto this group (you can select as many as you want at one time).2. Press [Add Membership]. If you do not want to remove the group, simply press [Cancel].Remove Memberships1. Once a group is highlighted, press [Remove Membership]. This brings up a popup panel that lists all of the users that are eligible to be removed from thisgroup. If there are no users eligible to be removed from this group, you will get an error messagebox instead of the popup panel. Once you get the popup panel, simply select all of the users thatyou want to remove from this group (you can select as many as you want at one time).2. Press [Remove Membership]. If you do not want to remove the group, simply press [Cancel].DRAFT REVIEW COPYCTRL+SHIFT+F to search using Search Index (faster)