GE Monogram ZV750SPSS Dimensions And Installation Information

GE Monogram ZV750SPSS Dimensions And Installation Information Manual pdf 1 page image

Specification Created 6/09 130681ZV750SPSSGE Monogram® 36" Stainless Steel Wall-Mounted Hood605Dia148*Heightto Ceiling8-1/4"34-5/8"21-5/8"This vent hood may be installed onto a wall and ventedto the outdoors, or it can be installed for recirculatingoperation. All necessary parts for recirculating operationare supplied with the hood. No kits required.A decorative duct cover is provided to cover the ductfrom the top of the hood to a 7'11" to 9'2" ceiling for ventmode (9'6" for recirculating mode).Accessories:An optional stainless steel duct cover is available for 9'to 10'3" for vent mode (10'8" for recirculating mode) ceilingheights. Order ZX7510SPSS optional duct coverat the same time as the vent hood and have on sitebefore installation.For answers to your Monogram,® GE Profile™or GE® appliance questions, visit our websiteat geappliances.com or call GE Answer Center®service, 800.626.2000.Dimensions and Installation Information (in inches)Listed byUnderwritersLaboratoriesDimensions and Clearances:The vent hood should be installed 24" min. and 30" max.above the cooking surface. The cooking surface should beat least 36" above the floor. Installation will be easier if thevent hood is installed before the range or cooktop/countertopis installed.This hood can be installed over a Monogram electric or gascooktop. It cannot be installed over a Monogram professionalrangetop or range.Installation Information: Before installing, consultinstallation instructions packed with product or availableon monogram.com for current dimensional data.Note: Installation height should be measured from thecooking surface to the lower edge of the hood.605Dia14924" to 30"36" Min.The vent hood must be installed 24" min. and 30" max. abovethe cooking surface depending on the ceiling height.

/ 2

Related manuals for GE GE Monogram ZV750SPSS