For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.130256Specification Revised 11/07Listed byUnderwritersLaboratoriesZHU36RBMGE Monogram® 36" Induction CooktopDimensions and Installation Information (in inches)269Dia1AC2" Min.to Side WallsB2-1/2"Min.to FrontEdge1-3/4"Min.D3-1/4"4-5/8" atFront Baffle557ZEU66916" MinJunctionBoxNote: When the cooktop is installed over an oven, the baffle atthe front is not required.Combination installationsConsideration must be given to electrical supply locationswhen the cooktop is installed with other products in the samecabinet. Always refer to each product's installation instructionsfor clearances and electrical requirements.• Install these cooktops with any exhaust hood of the sameor treater width; 300 CFM or greater air flow rating isrecommended.• This 36" cooktop may be installed in combination witha Monogram® 36" downdraft vent. See downdraft ventsfor details.• A Monogram single oven may be installed below thesecooktops.The serial plate is located on the bottom of the cooktops.Electrical requirementsProduct rating is 120/240V, 60Hz, 36" cooktopsrequire a 50-amp circuit. The cooktops mustbe connected to a supply circuit of the propervoltage and frequency and protected by a time-delay fuse or circuit breaker.All models require 12"minimum clearance below thecooktop bottom to combustiblematerials.The cooktop bottom has airintake ports toward the frontthat help cool the components.Do not install a shelf orpartition beneath the cooktopthat is more than 18" deep.Dimensions:36" Models A B(depth at sides) B(depth at center) C DZHU36RSM 36-1/8" 20-15/32" 20-7/8" 33-7/8" 19-1/8"