GE JP930 Owner's Manual

Also see for JP350: Installation instructions Owner's manual Installation instructions Owner's manual Technical service guide

Contents

GE JP930 Owner's Manual Manual pdf 6 page image

6Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsCustomer ServiceUsing the surface units.Throughout this manual, features and appearance may vary from your model.Never cook directly on the glass.Always use cookware.About the radiant surface units…The radiant cooktop features heatingunits beneath a smooth glass surface.NOTE: A slight odor is normal when a newcooktop is used for the first time. It is caused bythe heating of new parts and insulating materialsand will disappear in a short time.NOTE: On models with a white glass cooktop,it is normal for the surface to appear dicoloredwhen it is hot. This is temporary and willdisappear as the glass cools.The surface unit will cycle on and off tomaintain your selected control setting.It is safe to place hot cookware from theoven or surface on the glass surface whenthe surface is cool.Even after the surface units are turnedoff, the glass cooktop retains enough heatto continue cooking. To avoid over-cooking, remove pans from the surfaceunits when the food is cooked. Avoidplacing anything on the surface unit untilit has cooled completely.nWater stains (mineral deposits) are removableusing the cleaning cream or full strength whitevinegar.nUse of window cleaner may leave aniridescent film on the cooktop. The cleaningcream will remove this discoloration.nDon’t store heavy items above the cooktop.If they drop onto the cooktop, they can causedamage.nDo not use the surface as a cutting board. SURFACECOOKINGOFF CENTERAlways place the pan in the center ofthe surface unit you are cooking on.DRAGGINGDo not slide cookware across thecooktop because it can scratch theglass. The glass is scratch resistant,not scratch proof.Radiant Surface UnitsThe control for the radiant surface unitcan be set anywhere betweenLO andHIfor an unlimited number of heat settings.With the infinite switch the coil cycles onand off to maintain your selected controlsetting.The control knob must be pushed in andturned from theOFF position. When thecontrol knobs are in any position otherthan off, they may be turned withoutpushing down.Be sure you turn the control knob offwhen you finish cooking. You will feel aclick at theOFF position.Cooktop temperatures increase with thenumber of surface units that are on. With3 or 4 units turned on, surface temperaturesare high so be careful when touching thecooktop.TheHOT SURFACE indicator lights willglow when any radiant element is turnedon, and will remain on until the surface iscooled to approximately 150°F.NOTE:nThey come on when the unit is hot to the touch.nThey stay on even after the unit is turned off.nThey glow brightly until the unit is cooled toapproximately 150°F.Be sure you turn the control knob toOFF when you finish cooking.