11Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Supportwww.GEAppliances.caOven Control, Clock and Timer Features and SettingsAUTOMATIC OVEN Light (on some models)This lights anytime the oven has beenprogrammed using the COOK TIME orSTART TIME functions.OVEN LIGHT or PadTouch this pad to turn the oven light on oroff.– PadShort taps to this pad will decrease the timeor temperature by small amounts. Touchand hold the pad to decrease the time ortemperature by larger amounts.+ PadShort taps to this pad will increase the timeor temperature by small amounts. Touchand hold the pad to increase the time ortemperature by larger amounts.CLEAN Pad (on some models)Touch this pad to select the self-cleaningfunction. See the Using the self-cleaning ovensection.CLEAN LightFlashes while in edit mode—you can changethe length of time for the self-clean cycle atthis point. Glows when the oven is in the self-clean cycle. After the self-clean cycle, the lightwill turn off. Unlatch the door.OFF PadTouch this pad to cancel ALL ovenoperations except the clock and timer.BROIL PadTouch this pad to select the broil function.BROIL LightFlashes while in edit mode—you can switchfrom HI to LO BROIL at this point. Glows whenthe oven is in broil mode.Indicator Lights (on some pads)EDIT mode lasts several seconds after the lastpad press. START TIME and COOK TIME will bethe only pads lit if either of these options isselected. (Example: START TIME is selectedwith BAKE—the START TIME pad will remain lituntil the clock reaches the programmed time,at which point it will turn off and the BAKEpad light will light up).Fahrenheit° 140 150 170 200 250 275 300 325 350 375 400 425 450 475 500 525 550Celsius° 60 65 75 95 120 135 150 160 175 190 205 220 230 245 260 275 290Temperature ConversionsConvenience Outlet (on some models)The 120V convenience outlet located on the topof the backguard may be used to plug in smallelectrical appliances.When using the outlet, be sure that the electricalcord does not rest on or near a surface unit.If the surface unit is turned on, the cord willbe damaged.To reset the circuit breaker, press the switchlocated near the outlet on top of the backguard.Power OutageIf a flashing time is in the display, you have experienced apower failure. Reset the clock.To reset the clock, touch the CLOCK pad. Enter thecorrect time of day by touching the + or – pads.Touch the START/ON pad.