GE JB905 Technical Service Manual

Also see for JB905: Installation instructions Installation instructions Owner's manual Owner's manual Dimension Guide

GE JB905 Technical Service Manual Manual pdf 19 page image

– 19 –Removal and Replacement1. Disconnect power.2. Open the oven door and remove 2 screwsholding the latch motor from the latch trim.3. Raise the cooktop panel.4. Pull the latch motor assembly from under thetop panel.5. The top panel is held in place by 6 screws.Remove the screws then remove the toppanel.Latch MotorAssemblyTop Panel6. Label and disconnect the 6 terminal lugs andremove the latch motor assembly.Latch MotorAssembly6 Terminal LugsOven SwitchThe oven switch is located on the front ovenframe, between the top enclosure and the ovenliner. The oven switch is accessible by lifting thefront of the cooktop.The oven switch provides a closed or open signalto the motorized door lock, oven light, andconvection fan motor.Connector2 Switch Tabs SwitchLatch TrimTop Panel