Hydran* M2-X Instruction ManualPage 182 MA-029 Rev. 1.0, 30-Jul-185. Select an appropriate baud rate using the Up and Down arrow keys. Therecommended setting is 115,200 bps for low-noise environments; ifcommunication problems arise, try again with a lower baud rate. Press Okwhen done. The Hydran M2-X now displays:6. On the laptop computer, launch the BootDownloader.exe program,normally stored in the Hydran M2-X installation folder (typicallyC:\Program Files\Hydran M2-X ). The HM2-X Downloader for Boot Modescreen, shown in Figure F - 1 below is now displayed. Proceed as follows:• In Comm port:, select the appropriate COM port.• In Baud rate:, select the same baud rate as in step 6.• Click Browse... to locate the CB.APP file.• Click Download to start the program upgrade.Figure F - 1: Upgrading the Embedded Program Using BootDownloader.exe7. The Hydran M2-X now displays the screen below. The HM2-X Downloaderfor Boot Mode screen now displays status messages in the Status: area aswell as the progress percentage at the bottom; when the upgrade iscompleted, it displays the message Upgrade Completed in its Status:area.
