Hydran* M2-X Instruction ManualPage 180 MA-029 Rev. 1.0, 30-Jul-18Figure E-2: Removing the I/O AssemblyFigure E-3: Removing the I/O Plate10. Put back and tighten the four screws holding in place the cover plate of theelectronic card cage. See Figure E-1 E-3 above.11. Put back the Hydran M2-X cover.12. Put back and tighten the four screws holding the cover in place. See Figure4-11.The hardware installation of the I/O interface(s) is now complete.See the following sections to verify the I/O interface(s) that have just beeninstalled:• Analog input: Section 4.2.8.• Analog output: Section 4.2.9.
