GE DVM1850 User Manual

Also see for DVM1850DMBB: Installation instructions

Contents

GE DVM1850 User Manual Manual pdf 35 page image

35Consumer SupportTroubleshooting TipsOperating InstructionsSafety InstructionsCooktop Light/Night LightOn models JVM1850, JNM1851, DVM1850 andEMO4000, replace the burned-out bulb with a 120 volt,40-watt incandescent bulb (WB36X10003), availablefrom your GE supplier.On models JVM1870, JVM1871, JVM2050 andJVM3670, replace the burned-out bulb with a 120 volt,20-watt halogen bulb (WB36X10213), available fromyour GE supplier.To replace the bulb(s), first disconnect thepower at the main fuse or circuit breaker panelor pull the plug.Remove the screw at the left edge of the lightcover and push on the right edge of the coverto open.Be sure the bulb(s) to be replaced are coolbefore removing. After breaking the adhesiveseal, remove the bulb by either gently turning(for models JVM1850, JNM1851, DVM1850 andEMO4000) or pulling straight out (for modelsJVM1870, JVM1871, JVM2050 and JVM3670).Replace with the same size and type bulb.Raise the light shield and replace the screw.Connect electrical power to the oven.4321Replacing the light bulbs. ge.comRemove screw