GE CVM2072 Installation Instructions Manual

Also see for CVM2072SMSS: Dimension Guide Owner's manual

GE CVM2072 Installation Instructions Manual Manual pdf 21 page image

Guide the wire down into the blower opening so itrests securely in front of the blower.109ADAPTING MICROWAVEBLOWER FORRECIRCULATION (cont.)C4.21Replace blower plate with the screw removed inStep 1.Secure blower unit to microwave with the screwremoved in Step 4.Attach the microwave oven to the top cabinet.Cabinet FrontCabinet Bottom ShelfFiller BlockMicrowave Oven TopEquivalent to Depthof Cabinet RecessBack ofMicrowaveInstallation Instructions3MOUNT THE MICROWAVEOVENC5.FOR EASIER INSTALLATION AND PERSONALSAFETY, WE RECOMMEND THAT TWO PEOPLEINSTALL THIS MICROWAVE OVEN.IMPORTANT: Do not grip or use handleduring installation.NOTE: If your cabinet is metal, use the nylongrommet around the power cord hole to preventcutting of the cord.NOTE: We recommend using filler blocks if thecabinet front hangs below the cabinet bottom shelf.IMPORTANT: If filler blocks are not used,case damage may occur from overtighteningscrews.Insert a self-aligning screw through top centercabinet hole. Temporarily secure the oven byturning the screw at least two full turns after thethreads have engaged. (It will be completelytightened later.) Be sure to keep power cordtight. Be careful not to pinch the cord, especiallywhen mounting flush to bottom of cabinet.NOTE: When mountingthe microwave oven,thread power cordthrough hole in bottom oftop cabinet. Keep it tightthroughout Steps 1–3. Donot pinch cord or liftoven by pulling cord.Lift microwave, tilt itforward, and hookslots at back bottomedge onto four lowertabs of mountingplate.Self-Aligning Screw42 Rotate front of ovenup against cabinetbottom.18